Sends a
"Message" to all those with the umode +w. Only IRCops can send wallops, while
anyone can view them.
Syntax: WALLOPS *** GLOBOPS
Command ***
Sends a global "Message" to all IRCops. Only viewable
by IRCops (unlike WALLOPS, which can be viewed by normal users).
Syntax:
GLOBOPS Example: GLOBOPS Going to be akilling those
clones... *** CHATOPS Command ***
GLOBOPS is usually reserved
for important network information. Therefore, for Oper Chat, CHATOPS
was invented. IRCops with the +c flag enabled will be able to
send/receive CHATOPS messages.
Similar
to GLOBOPS, except only received by those IRCops local to your server.
Syntax:
LOCOPS Example: LOCOPS Going to be adding a temp k:line
for that user... *** ADCHAT Command ***
This command sends to
all Admins online Only for Admins. This is a ChatOps style command
Syntax:
ADCHAT Example: ADCHAT Hey guys!
*** NACHAT Command
***
This command sends to all NetAdmins & TechAdmins online Only
for Net/Techadmins. This is a ChatOps style command Syntax: NACHAT Example:
NACHAT Hey guys!
*** TECHAT Command ***
This command
sends to all TechAdmins online Only for Net/Techadmins. This is a
ChatOps style command Syntax: TECHAT
Example: TECHAT
Hey guys! *** KILL Command ***
Forcefully Disconnects a user
from an IRC Server. IRC Operators only.
Syntax: KILL Example:
KILL Clone5 Cloning is not allowed *** KLINE Command ***
"Bans"
a hostmask from connection to the IRC server. The user can however
connect to other servers on the network !! IRC Operators only.
Removes a currently active z:Line. IRC Operators only.
Syntax:
UNZLINE
Example: UNZLINE 127.0.0.1 *** GLINE command ***
This
command provides timed G:Lines. If you match a G:Line you cannot
connect to ANY server on the IRC network. A time of 0 in the GLINE
makes it permanent (Never Expires). In Unreal 3.1.1 you may also
specify the time in the format 1d10h15m30s. IRC Operators only. Syntax:
GLINE :
(Adds a G:line for user@host) GLINE - (Removes a
G:line for user@host) Example: GLINE *@*.dal.net 900 :Spammers (Adds a
15 min G:line) GLINE *@*.dal.net 1d5h :Spammers (Adds a 29 hour
G:line)
*** SHUN Command ***
Prevents a user from
executing ANY command except ADMIN and respond to Server Pings. This
effectively prevents them from doing anything on the server. A time
of 0 on the SHUN makes it permanent (Never Expires). In Unreal 3.1.1
you may also specify the time in the format 1d10h15m30s. IRC
Operators only.
Syntax : SHUN : (Shun
the nickname for time) SHUN + : (Shun the
user@host for time) SHUN - (Removes the SHUN for
user@host) SHUN (View the current SHUN list) Example : SHUN
+foobar@aol.com 600 :Spamming (Shuns foobar@aol.com
for 10 mins for Spamming) SHUN +foobar@aol.com 1d6h :Spamming (Adds a
30 hour SHUN) *** GZLINE Command ***
This command provides
timed global Z:line. If you match a Global Z:Line you cannot connect
to ANY server on the IRC network A time of 0 in the GZLINE makes it
permanent (Never Expires). You may also specify the time in the
format 1d10h15m30s. IRC Operator only command. Syntax: GZLINE :
(Adds a
Global Z:line for user@host) GZLINE - (Removes a
Global Z:line for user@host) Example: GZLINE *@*.dal.net 900
:Spammers (Adds a 15 min Global Z:line) GZLINE *@*.dal.net 1d5h
:Spammers (Adds a 29 hour Global Z:line) *** TKLINE Command ***
This
command provides timed K:Lines. If you match a time K:Line you cannot connect
to the server until the time has expired A time of 0 in the TKLINE
makes it permanent (Never Expires). You may also specify the time in
the format 1d10h15m30s. IRC Operator only command. Syntax: TKLINE :
(Adds a Timed
K:line for user@host) TKLINE - (Removes a Timed
K:line for user@host) Example: TKLINE *@*.dal.net 900 :Spammers (Adds
a 15 min Timed K:line) TKLINE *@*.dal.net 1d5h :Spammers (Adds a 29
hour Timed K:line) *** TZLINE Command ***
This command
provides timed G:Lines. If you match a Timed Z:Line you cannot connect
to the server until the time has expired A time of 0 in the TZLINE
makes it permanent (Never Expires). You may also specify the time in
the format 1d10h15m30s. IRC Operator only command.
Syntax:
TZLINE :
(Adds
a Timed Z:line for user@host) TZLINE - (Removes a
Timed Z:line for user@host) Example: TZLINE *@*.dal.net 900
:Spammers (Adds a 15 min Timed Z:line) TZLINE *@*.dal.net 1d5h
:Spammers (Adds a 29 hour Timed Z:line) *** AKILL Command *** (Use
Services AKILL Instead)
Adds an Autokill for the specific host
mask. This prevents any user from that hostmask from connecting to
the network. Services Admin & above only ..
Removes an AKILL set
by an IRC Operator or Services. Services Admin & above only ..
Syntax
: RAKILL *** REHASH Command ***
Prompts the
server to reread the configuration files. IRC Operators only.
Syntax:
REHASH - REHASH - If servername and
flags are not specified this rehashes the ircd.conf , removing any
temporary k:lines. If servername is specified, this is used to rehash
config files on servername Only TechAdmins and NetAdmins may specify
a server name
The flags are used to rehash other config files,
valid flags are: -dccdeny - Rehashes dccdeny.conf -dynconf -
Rehashes UnrealIRCd Config and Network file -restrict - Rehashes
chrestrict.conf -vhost - Rehashes vhost.conf -motd - Rehashes all
MOTD files and RULES files (including T:lines) -opermotd - Rehashes
the OPERMOTD -botmotd - Rehashes the BOTMOTD -garbage - Force
garbage collection -badwords - Rehashes the badwords config. ***
RESTART Command ***
Kills and restarts the IRC daemon,
disconnecting all users currently on that server. IRC Operators only.
Syntax:
RESTART RESTART RESTART *** DIE
Command ***
Kills the IRC daemon, disconnecting all users
currently on the current server. IRC Operators only.
Syntax:
DIE DIE
*** LAG Command ***
This command is
like a Sonar or Traceroute for IRC servers You type in /LAG
irc.fyremoon.net and it will reply from every server it passes with
time and so on Useful for looking where lag is and optional TS
future/past travels Syntax: LAG *** SETHOST Command
***
This command is so you can change your Virtual host
(hiddenhost) to everything you want to, Except special characters. IRC
Operators only.
Syntax: SETHOST Example:
SETHOST microsoft.com
*** SETIDENT Command ***
With this
command you can change your Ident (username). IRC Operators only.
Adds a DCC Deny for that
filename mask. This means that any DCC sends of that filename mask through
the server will be rejected. IRC Operators only. Syntax : DCCDENY
*** UNDCCDENY Command ***
If
the EXACT file you type is found it is removed, else it uses wildcards
to search IRC Operators only. Syntax : UNDCCDENY ***
SAJOIN Command ***
Forces a user to join channel(s). Can only be
used by a Services Admin.
This will calculate the milliseconds (Lag) between
servers
Syntax: RPING *** TRACE Command ***
TRACE
is useful to know what servers are connected to what. Sometimes
TRACE can be confusing, especially if you are using it for the first
time. Syntax: TRACE Example: TRACE irc.fyremoon.net ***
OPERMOTD Command ***
This
will add the text you specify to the MOTD (the general motd -
T:lines doesnt count ..) Server Admin & Co-Admin only Syntax:
ADDMOTD :text *** ADDOMOTD Command ***
This will add the text
you specify to the Operator MOTD Server Admin & Co-Admin only
Syntax:
ADDOMOTD :text *** SDESC Command ***
With this command you
can change your Server Info Line Without having to squit and
reconnect. This is a Server Admin/Co Admin only command
Syntax:
SDESC Example: SDESC If you belong to me.. ***
MKPASSWD Command ***
This command will encrypt the string it has
been given So u can add it directly to the unrealircd.conf if you
use Encrypted passwords. Type can be crypt, sha1, or md5. Sha1 and
md5 are only available when compiled with SSL support. Syntax :
MKPASSWD *** TSCTL Command ***
This is a
highly advanced command IRC Operators only. Syntax: TSCTL OFFSET
+|- (Adjust internal IRC clock) TSCTL TIME (Will give TS
report) TSCTL ALLTIME (Shows the TS report of all Servers) TSCTL
SVSTIME (Sets the Time on all servers) *** HTM Command
***
Switches the server In & Out of High Traffic Mode It
is activated when the server is receiving extremely high amounts of
information IRC Operators only. Syntax: HTM [option] If no
option is specified it just displays the current HTM state If an
option is specified it does a more specific task, valid options are: ON
- Force HTM to activate OFF - Force HTM to deactivate NOISY -
Make HTM announce when it is entering/leaving HTM QUIET - Stop HTM
from announcing when it is entering/leaving HTM TO - Tell HTM
at what incoming rate to activate HTM
UnrealIRCd O:Line
flags
r = Access to /rehash server h = Oper can send /help
ops - gets +h on oper up g = Oper can send /globops w = Oper can
send /wallops l = Oper can send /locops c = Access to do local
/squits and /connects k = Access to do local /kills b = Oper can
/kline users from server B = Oper can /unkline users from server n
= Oper can send local server notices (/notice $servername message) u
= Oper can set /umode +c f = Oper can set /umode +f O = Global
oper, flags included: oRDK o = Local oper, flags included:
rhgwlckbBnuf R = Access to /restart server D = Access to /die
server K = Access to do global /kills A = Gets +A on oper up.
Server Administrator a = Gets +a on oper up. Services Administrator N
= Gets +N on oper up. Network Administrator T = Gets +T on oper up.
Technical Administator C = Gets +C on oper up. Co Administrator Y =
Access to do remote /squits and /connects z = Can add /zlines H =
Gets +x on oper up. W = Gets +W on oper up. ^ = Allows to use
umode +I * = Flags AaNCTzSHW^
